D-Link DSA-6100 User Manual page 72

Wireless access controller
Table of Contents

Advertisement

II. DWL-3200AP-v2.3+
DWL-3200AP version 2.3 Templates settings allow users to configure wireless 802.11b/g mode settings.
DWL-3200AP includes all three standards 802.11b/g mixed, 802.11b only and 802.11g only. Firmware upgrade
from DWL-3200AP v2.20 to v2.3 is NOT supported by the system.
General
Subnet Mask: The default is 255.255.255.0. All devices in the network must share the same subnet mask.
Default Gateway: The default is 192.168.1.1. Enter the gateway IP address for the network, typically a router.
SNTP/NTP: The time server IP address, time zone, and the local time will be displayed.
Time Zone: Select your time zone from the drop-down menu.
Server IP: Enter the IP address of a SNTP/NTP server.
Daylight Saving Time: Check the box to enable daylight saving time.
SNMP
DSA-6100 User Guide
66

Advertisement

Table of Contents
loading

Table of Contents