Table of Contents
Advertisement
Wireless Interface Setting: Click Wireless LAN to enter the Wireless interface. The data of Properties
and Security need to be filled.
Basic Settings:
Channel: Select the appropriate channel from the list to correspond with the network settings; for
example, 1 to 11 channels are suitable for the North America area.
Super Mode: Select either Disabled, Super Mode with Turbo or Super Mode without Turbo.
When Multi-SSID is selected as enabled, the item Super Mode cannot be active. Super G Mode can
only be changed when Multi-SSID is disabled.
Internal Station Connection: Select either Enabled or Disabled. The connection allows clients to
communicate with each other when enabled.
Performance Settings
Data Rate: The default is Auto. Available range is from 1 to 54Mbps. The rate of data transmission
should be set depending on the speed of the wireless network. Select from a range of transmission
speed or keep the default setting, Auto, to make the Access Point automatically use the fastest rate
possible.
Beacon Interval (ms): Enter a value between 20 and 1000 msec. The default value is 100
milliseconds. The entered time means how often the beacon signal transmission between the access
point and the wireless network.
DTIM: Delivery Traffic Indication Message. Enter a value between 1 and 255.
DSA-6100 User Guide
52
Advertisement
Table of Contents
