Table of Contents
Advertisement
Syslog Server- Traffic History
Proxy Server
Friendly Logout
Internet Connection Detection
WAN Failover
Remote Management IP
Management
Retainable Days
History
Traffic log Email To
Time
User
Preferred DNS Server
DNS
Alternate DNS Server
PMS
Session Log
SNMP
NTP Server
Date Time
Idle Timer
Multiple Login
Guest Account
Server Status
IP:Port
Syslog Server
Email To
FTP Server
The IP address and port number of the external Syslog
Server. N/A means that it is not configured.
Enabled/disabled indicates whether the system is
currently using a proxy server.
Enabled/disabled indicates whether a logout confirmation
message has been set for display when users click the
logout button.
Show a warning message when Internet connection is
down.
Show WAN1 and WAN2 status when WAN Failover is
enabled.
The IP addresses of remote computers that are allowed to
access the management interface.
Enabled/disabled indicates the current status of the SNMP
management function.
The maximum number of days for the system to retain the
users' traffic information.
The email address that the traffic history information will
be sent to.
The network time server that the system is set to align.
The system time is shown as the local time.
The number of minutes allowed for the users to be
inactive.
Enabled/Disabled indicates whether the current setting
allow/disallow multiple logins from the same account.
Enabled/Disabled indicates whether the current status
allows Guest Accounts log in.
IP address of the preferred DNS Server.
IP address of the alternate DNS Server.
The current status of the PMS server.
The IP and Port information of the PMS server.
Shows Disabled or Enable the IP address and port
number of the Syslog Server in Session Log.
The email address of the receiver.
Shows Disabled or Enabled the IP address and port
number of the FTP Server in Session Log.
DSA-6100 User Guide
136
Advertisement
Table of Contents
