Remote Logging; Email - D-Link DWC-1000 User Manual

Section 10 - Troubleshooting
Path: Maintenance > Logs Settings > Remote Logging > Email
The wireless controller can be configured to send logs to an e-mail address. E-mail logs can be sent out based on
a defined schedule by first choosing the frequency: hourly, daily, or weekly. The wireless controller lets you send
configuration logs to three e-mail recipients.
Field
Remote Log Identifier
E-Mail Logs
E-Mail Server Address
SMTP Port
Return E-Mail Address
Send to E-mail Address(1-3)
D-Link DWC-1000 User Manual

Remote Logging

Email

Log Options
Enter a prefix used to identify the source of the message. This identifier is prefixed to
both e-mail and Syslog messages.
Routing Logs
Enables or disables e-mail logs. Choices are:
• ON = enable e-mail logs. Complete the remaining fields on this page.
• OFF = disable e-mail logs. The remaining fields on this page are unavailable.
If E-Mail Logs is enabled, enter the IP address or Internet Name of a Simple Mail
Transfer Protocol (SMTP) server. The wireless controller will connect to this server
to send e-mail logs when required. The SMTP server must be operational for e-mail
notifications to be received.
If E-Mail Logs is enabled, enter the SMTP port of the e-mail server.
If E-Mail Logs is enabled, enter the e-mail address where the replies from the SMTP
server are to be sent (required for failure messages).
If E-Mail Logs is enabled, enter up to three email addresses where logs and alerts are
to be sent.
Description
381