HP 48-port Serial Console Server components
The 48-port SCS has the following front and rear panel components.
Front panel components
Figure 2-3
HP 48-port Serial Console Server front panel
1
Online LED—Illuminates
steadily (not blinking)
when the SCS self-test and
initialization procedures
complete successfully.
2
Power LED—Illuminates
when the SCS is
connected to a power
source.
3
Reset button—Reboots the
SCS.
4
Init button—Restores the
SCS factory default values
when pressed and held.
5
RJ-45 serial console port.
Speed and Link/Traffic LEDs
The Speed and Link/Traffic LEDs are adjacent to the LAN port. Table 2-1 describes the possible values for these two
LEDs.
Table 2-1
LAN LED values
Speed LED
Off
Off
Green
Off
Green
6
LAN port—Connects a
10BaseT or100BaseT
interface cable.
7
RJ-45 port connectors—
Connects serial cabling.
The port number is
adjacent to each
connector.
8
Speed LED—Indicates the
link speed. See Table 2-1.
9
Link/Traffic LED—Indicates
whether there is traffic on
the link. See Table 2-1.
Link/Traffic LED
Off
On
On
Flashing
Flashing
Description
No link
Link at 10 Mbps
Link at 100 Mbps
Traffic at 10 Mbps
Traffic at 100 Mbps
Installation and configuration 10