Supported Traps - HP 16-port SCS Installation Instructions Manual

Supported traps

The SCS supports the following MIB2 traps:
authenticationFailure
linkup
linkDown
coldStart
Table 6-4 lists the supported enterprise traps.
Table 6-4 SCS enterprise traps
Trap
ConfigurationFileLoaded
FactoryDefaultsSet
ImageUpgradeResults
ImageUpgradeStarted
NFSDisableRqstd
NFSEnableRqstd
NFSMountedOK
NFSMountFailedGaveUp
NFSMountFailedRetrying
NFSMountLost1stRetryFailed
NFSMountLostGaveUp
NFSMountLostRetrying
NFSMountVerifiedOK
NFSPortDisableRqstd
NFSPortEnableRqstd
NFSPortFileClosed
NFSPortFileOpenOK
Description and variables
The SCS has loaded a configuration file.
Variables: Initiating user name and name of loaded file
The SCS has received a command to set itself to factory default values. (The SCS sends this
trap after receiving the command, but before actually reverting to factory default values.)
An image upgrade has ended.
Variables: Result (successful or error code), initiating user name, image type (boot or
application), upgrade version number, and running version number (if the upgrade was
successful, the two version numbers will match)
The SCS has started an image upgrade.
Variables: Initiating user name, image type (boot or application), new version number, and
current version number
A request has been made to disable NFS.
Variable: Requesting user name
A request has been made to enable NFS.
Variable: Requesting user name
NFS is enabled and the mount operation has completed successfully.
NFS is enabled but repeated mount attempts have failed. No additional mount retries will be
performed.
Variables: Primary and secondary NFS error codes. See "NFS error codes and ports."
NFS is enabled, and the first mount attempt failed. Additional mount retries are still being
performed.
Variables: Primary and secondary NFS error codes. See "NFS error codes and ports."
NFS is enabled, and a mount completed successfully. That mount was lost, and the first
attempt to re-establish that mount has now failed. Additional retries are being performed.
Variables: Primary and secondary NFS error codes. See "NFS error codes and ports."
NFS is enabled, and a mount completed successfully. That mount was lost and repeated
attempts to re-establish that mount have failed. No addition mount retries will be performed.
Variables: Primary and secondary NFS error codes. See "NFS error codes and ports."
NFS is enabled, and a mount completed successfully. However, that mount has now been
lost and is being retried.
Variables: Primary and secondary NFS error codes. See "NFS error codes and ports."
NFS is enabled and has successfully verified the mount in response to a subsequent NFS
Enable command.
An NFS Port Disable command has been issued.
Variables: Initiating user name and SCS port number
An NFS Port Enable command has been issued.
Variables: Initiating user name and SCS port number
NFS has closed the history file on the NFS server.
Variable: SCS port number
NFS is enabled on the port and has successfully opened the history file on the NFS server.
Variable: SCS port number
Technical specifications 81