System Configuration; Connecting To Slmp Equipment - Mitsubishi Electric GOT2000 Series Connection Manual

10.2 System Configuration

10.2.1

Connecting to SLMP equipment

SLMP equipment
Communication
Controller
Type
Cable model
• 1000BASE-T
100BASE-TX
Shielded twisted
pair cable (STP)
or unshielded
twisted pair cable
(UTP) of category
SLMP
Ethernet 5 or higher
equipment
• 10BASE-T
Shielded twisted
pair cable (STP)
or unshielded
twisted pair cable
(UTP) of category
3 or higher
*1 Connect the GOT to the SLMP equipment via a hub.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX/1000BASE-T standards.
*2 When connecting GT2000 to an equipment that meets the 10BASE (-T/2/5) standard, use the switching hub and operate in an
environment where 10Mbps and 100Mbps can be mixed.
*3 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*4 Use the straight cable.
*5 For details, refer to the SLMP equipment manual.
*6 GT25-W does not support the option device.
Connection cable
Connection cable
External
Maximum
device
segment
*4
*3
length
*1
100m
Hub
Hub
Connection cable
Connection cable
Maximum
segment
*4
Cable model
*3
length
• 1000BASE-T
100BASE-TX
Shielded twisted
pair cable (STP) or
unshielded twisted
pair cable (UTP) of
category 5 or
higher 100m
• 10BASE-T
Shielded twisted
pair cable (STP) or
unshielded twisted
pair cable (UTP) of
category 3 or
higher
10.2 System Configuration
GOT
*2
GOT
Number of
connectable
Option
GOT
equipment
*6
model
device
When SLMP
equipment:GOT
is N:1
- (Built
The number of
into GOT)
SLMP
equipment for 1
GOT is TCP:
128 or less.
When SLMP
equipment:GOT
is 1:N
The following
GT25-
shows the
J71E71-
number of GOTs
100
for 1 SLMP
equipment
Depends on the
SLMP
equipment
*5
used.
10 - 3
10