Sending Video Image To Personal Computer - Mitsubishi Electric GOT2000 Series Connection Manual

20.2.2

Sending video image to personal computer

■1. When using the Ethernet connection cable
Video camera,
Microphone,
Speaker
Connection cable 1)
Multimedia Signal
controller type
Model name
Coaxial
NTSC
*4
connection
/PAL
diagram 1)
*1 The cable length differs depending on the specification of the video camera used by the user.
*2 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver, wireless LAN adapter (NZ2WL-JPA or NZ2WL-JPS), or other system
equipment corresponding to the applicable Ethernet network system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standards.
For the controllers that can be connected to the wireless LAN adapters and how to set the wireless LAN adapter, refer to the
manual of the wireless LAN adapter used.
*3 For the CF card to be inserted into the multimedia unit, refer to the following.
• Type of CF card that can be inserted
➠
• Precautions for using the CF card
➠
*4 For the type of the video camera that can be connected, refer to the following Technical News.
➠
*5 Install the multimedia interaction tool before use.
For details of the multimedia interaction tool, refer to the following manual.
➠
*6 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*7 GT2705-V is not supported.
*8 The unit installation position, and the number of units, refer to the following.
➠
System Application (Extended function)
Wireless LAN
Connection cable 1)
interface 1)
GOT
Option
Max.
*8
Model
device
distance
(Interface 1))
GT27-MMR-
*1
*3
Z
*7
List of valid devices applicable for GOT2000 series (GOT-A-0064)
20.4 GOT Side Settings
List of valid devices applicable for GOT2000 series (GOT-A-0064)
GT Designer3 (GOT2000) Screen Design Manual
1.3.6 Installing a unit on another unit (Checking the unit installation position)
Extended function OS
Multimedia
GOT
Connection cable 2)
interface 2)
*2*3 Connection cable 2)
*8
Option device
Cable model
(Interface 2))
Ethernet Twisted pair cable
Interface • 10BASE-T
(Built into GOT) Shielded twisted
GT25-J71E71- pair cable (STP) or
100 unshielded twisted
pair cable (UTP):
Category 3, 4, and
5
• 100BASE-TX
GT27M-MMR-Z
Shielded twisted
pair cable (STP):
Category 5 and 5e
20.2 System Configuration
Communication driver
Option OS
Connection type
Gateway (FTP)
dependent
PC
Personal
Number of
Maximum
computer
connectable
segment
*5
equipment
*6
length
To be 1
selected multimedia
100m
by the controller
user. for 1 GOT
20
20 - 3