Interface; Programmer (Infrared Keypad); Mechanical - Siemens sitrans PROBE LU Instruction Manual

Interface

• HART
• configuration
• analog output
• display (local)

Programmer (infrared keypad)

Siemens Milltronics Infrared IS (Intrinsically Safe) Hand Programmer: for all locations,
including hazardous.
• approval
• ambient temperature
• interface
• power
• weight
• color

Mechanical

Process Connections
• threaded connection
• flange connections
• other connections
Transducer (2 options)
• ETFE (ethylene-tetrafluoroethylene), or
• PVDF (polyvinylidene fluoride)
Enclosure
• body construction
• lid construction
• conduit entry
• ingress protection
Notes:
• Please check the ambient and operating temperatures under
Process
8, and
page 8, for the specific configuration you are about to use or install.
• The use of approved watertight conduit hubs/glands is required for Type 4X /
NEMA 4X, Type 6 / NEMA 6, IP67 (outdoor application).
7ML19985HT01
standard, integral to analog output
Siemens SIMATIC PDM (PC), or HART handheld
communicator, or Siemens Milltronics infrared hand
programmer
4–20 mA
multi-segment alphanumeric liquid crystal with Bar
graph (representing level)
ATEX II 1 G, EEx ia IIC T4, SIRA 01ATEX2147
−20 to 40° C (−5 to 104° F)
proprietary infrared pulse signal
3V lithium battery (non-replaceable)
150 g (0.3 lb)
black
2" NPT, BSP , or G/PF
3" (80 mm) universal flange
FMS 200 mounting bracket, or customer-supplied
mount
PBT (polybutylene terephthalate)
hard-coated PEI (polyether imide)
2 x M20 cable gland, or 2 x 1/2" NPT thread
Type 4X / NEMA 4X, Type 6 / NEMA 6, IP67 (see note
below)
on page 8; also check
SITRANS Probe LU – INSTRUCTION MANUAL
±
0.02 mA accuracy
Approvals (verify against device nameplate)
Environmental
on page
on
Page 7