Program Mode; Programming; Display - Siemens sitrans PROBE LU Instruction Manual

Hand Programmer: function keys in RUN mode
Certain functions can be accessed directly from RUN mode by using specific keys.
Key
mA output value displayed in auxiliary reading field
Internal enclosure temperature displayed in auxiliary reading field (P343).
Parameter for auxiliary readings
Displays the value representing Echo Confidence (P805).
Toggle between Units and % on reading display
Initiate and complete PROGRAM mode access
Measurement key displays distance in auxiliary reading field.
1.
Press plus three-digit parameter number, sets parameter to show in the auxiliary display.

PROGRAM Mode

Programming

Note:
Accessing a parameter,
See
• Set parameters to suit your specific application.
• Activate PROGRAM mode at any time, to change parameter values and set
operating conditions.
• For local programming, use the Siemens Milltronics hand programmer.
• For programming from a distance, use either a PC running SIMATIC PDM, or a HART
handheld communicator.

Display

3
2
1
4
7ML19985HT01
1
on page 18, for detailed instructions.
1 – Primary Reading (displays parameter value)
2 – Secondary Reading (displays parameter
number)
3 – Programming indicator
4 – Auxiliary Reading (displays parameter names
for parameters P001 to P010, if a language is
selected. It displays the index value for indexed
parameters, such as P054.)
SITRANS Probe LU – INSTRUCTION MANUAL
Run Mode
Page 15