Siemens sitrans PROBE LU Instruction Manual page 47

P201 (mA Function) Settings Response for P210 and P211
Level, Space, or Distance
Volume
1.
Ensure the % symbol is displayed before entering a % value.
P210 4 mA Setpoint (low output)
:
Note
P210 is used to set the 4 mA loop current for the HART common module.
Sets the process level corresponding to the 4 mA value. 4 mA always defaults to 0, and
P201 determines whether this is a Level, Space, Distance, or Volume (or flow)
measurement. Level and Space are measured as a percentage of Span; Distance is
measured as a percentage of Empty.
Level
(P001 = 1)
transducer
face
Span
P007
P006
Empty
Values
Related Parameters
Enter the reading that is to correspond to a 4 mA output. Use percent or units, depending
on the setting for P051.
1.
To display flowrate instead of volume, see
page 32.
7ML19985HT01
Key in the material level in Units (P005) or percent
(P007) as referenced from Empty (P006).
Key in the volume in Maximum Volume (P051) units or as a
percent
(P001 = 2)
20 mA
Span
100%
Level
0%
4 mA
Range
Default
P201: mA Output Function
SITRANS Probe LU – INSTRUCTION MANUAL
1
of Maximum Volume.
Space
4 mA
Span
0%
Space
Empty
100%
20 mA
–99999 to 99999.
0.000 m (set to 0% as defined by
P201: mA Output Function)
P050 Vessel (or Channel) Shape
1
of Span
1
Distance
(P001 = 3)
4 mA
0%
Distance
Empty
100%
20 mA
on
Page 41