Mitsubishi Electric GOT2000 Series Connection Manual page 117


Message format
The following shows the message format of the dedicated commands for a microcomputer connection of GOT.
(1) Read clock data (N) command
The following shows an example of reading the clock data of GOT.
(Assuming that the clock data of GOT has been set to "2004, June 1, 18:46:49, Tuesday".)
Item
Example: Format 13 (Digital Electronics Corporation's memory link method (extended mode, ASCII code 1:n))
• Digital compatible signal (GS580 to GS583): OFF (Partly compatible)
Request message
(host GOT)
• Digital compatible signal (GS580 to GS583): ON (Fully compatible)
Time display
2004/06/01 18:46:49
Message format
Sum
Com-
ENQ Station No. ESC
mand
Check
0 0 N C
05 30 30 1B 4E 43
H H H H H H
(H) (L) (H)
This range Sum check
Sum
Com-
ENQ Station No. ESC
mand
Check
0 0 N C
05 30 30 1B 4E 43
H H H H H H
(H) (L) (H)
This range Sum check
2. MICROCOMPUTER CONNECTION (SERIAL)
TUE
CR LF
E
45 0D 0A
H H H
(L)
CR LF
9
39 0D 0A
H H H
(L)
(Continued to next page)
2.5 Message Formats
2
2 - 59