Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

7.7 Device Range that Can Be Set

The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.

Setting item
Item
Set the device name, device number, and bit number.
Device The bit number can be set only when specifying the bit of
word device.
Displays the device type and setting range which are
Information
selected in [Device].
Device name
Input relay (PI) PI0000 to PI2437
Output relay (PQ) PQ0000 to PQ2437
Input relay (PIW) PIW0 to PIW242
Output relay (PQW) PQW0 to PQW242
7 - 8
7. PROFIBUS DP CONNECTION

7.7 Device Range that Can Be Set

Description
Device No.
Setting range
representation
Decimal +
Octal
Decimal
POINT POINT POINT
PROFIBUS DP master equipment Device Settings
(1) When setting a bit device
Use the byte address (decimal) and bit address
(octal).
(2) When setting a word device
Use the byte address (decimal).
Device number
Bit address (octal)
Byte address (decimal)
Device name
Device number
Byte address (decimal)
(Use an even number.)
Device name
("W" is added.)