8.6 Precautions
(1) Replacing SLMP compatible device
After replacing an external device or a SLMP
compatible device due to failure and so on, the devices
may not communicate by changing the MAC address.
(When replaced with a device that has the same IP
address)
When a device in the Ethernet network is replaced,
restart all devices in the network.
(2) The deviation between MC protocol and SLMP
protocol
When using our products used in MC protocol for
SLMP protocol, there is a difference between the
corresponding commands. Refer to the following
manual and check if they are convertible.
SLMP Reference Manual
8 - 10
8. SLMP CONNECTION
8.6 Precautions