Devicenet Master Equipment Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

4.6 DeviceNet master equipment Side Settings

This section explains how to set the DeviceNet master
equipment.
POINT POINT POINT
DeviceNet master equipment
For the details of the DeviceNet master equipment
setting method, refer to the manual of the used
DeviceNet master equipment.

Installing the EDS file for GOT
Install the EDS file for GOT to the configuration tool on
the DeviceNet master equipment side, and set the GOT
as slave equipment.
For how to acquire the EDS file for GOT, refer to the
following.
4.5 Preparation of EDS File for GOT

Communication configuration
Set the communication parameters on the DeviceNet
master equipment side using the switches or
configuration tool.
Item
*1
Station No.
Transmission speed
Master
equipment
Input Size (Word)
Output Size (Word)
Slave
*1*4
Station No.
equipment
*1 Make sure that the station No. does not overlap.
*2 When the setting of "Transmission Speed" on the GOT side
is not set to "Automatic", align it with the setting on the
master equipment side.
4.4 GOT Side Settings
*3 Align the settings of "Input Size (Word)" and "Output Size
(Word)" on the GOT side with the settings on the master
equipment side.
*4 Align the setting of "Station No." on the GOT side with the
station No. of the slave equipment.
4.4 GOT Side Settings
Setting range
0 to 63
125kbps
*2
250kbps
500kbps
*3
0 to 128
*3
0 to 128
0 to 63

4.6 DeviceNet master equipment Side Settings

4. DeviceNet CONNECTION
4
4 - 7