Mitsubishi Electric AE-200A Instruction Book page 21

Table 5-4. Basic settings items for AE-200 using the AE-200 Initial Setting Tool, AE-200's LCD, or Web Browser
for Initial Settings
Setting items
Network
Unit information
Basic Settings License registration
System configuration
Basic system
Group
Refrigerant system
Interlocked LOSSNAY
Unit Settings Block
Energy management block
PI controller
AI controller
*1 Settable items vary with the initial settings method (Initial Setting Tool, AE-200's LCD, or Web Browser for Initial Settings).
*2 These items must be set when an apportioned electricity billing function is used.
®
5-4-1. BACnet function initial settings flow
After performing the initial setting of air conditioning system in the AE-200 using the AE-200 Initial Setting Tool,
AE-200/AE-50's LCD, or Web Browser for Initial Settings, perform the following AE-200 BACnet
settings. Refer to this manual for detailed procedures and settings details for AE-200 BACnet
settings cannot be configured from the BACnet
Tool or AE-200's LCD.)
®
Set on the BACnet Setting Tool.
WT07921X01
Initial Setting Tool
*1
*1
*2
*2
®
Setting Tool. Carry out settings from the AE-200 Initial Setting
Ensure that the LAN2 (for BACnet
Ensure that the LAN1 (for air conditioning system) of AE-200 is not connected.
Connect the PC (BACnet
Initial settings for BACnet
Remove the PC from LAN1 of AE-200.
Connect the BACnet
AE-200's LCD
– V
V V
– V
V –
V V
V V
V –
V V
V V
V V
V V
V V
®
) of AE-200 is not connected.
®
Setting Tool) to LAN1 of AE-200.
®
related items
®
to LAN2 of AE-200.
21
(V: Settable/—: Not settable)
Web Browser for
Initial Settings
V
V
V
–
V
V
–
V
V
–
V
V
®
function
®
settings. (Group