Mitsubishi Electric AE-200A Instruction Book page 22

5-4-2. Initial settings procedure using the BACnet
Perform initial BACnet
("No." in the following table indicate the steps.)
No.
Menu bar
1
2
[AE-200/AE-50/EW-50] — [Mode Setting] ("Offline")
3
[AE-200/AE-50/EW-50] — [Acquire Settings]
Tab
4
5
6
7
8
9
Menu bar
10
11
12
[AE-200/AE-50/EW-50] — [Mode Setting] ("Online")
13
[AE-200/AE-50/EW-50] — [Mode Setting] (Confirm)
*1 After performing [Send Settings] to the AE-200, check the followings.
① Perform [Acquire Settings] and check that the data has been properly set.
② Check that the AE-200 BACnet
WT07921X01
®
settings using the BACnet
®
BACnet Setting Tool
[AE-200/AE-50/EW-50] — [Property]
System Settings — Basic System
BACnet Settings — BACnet
—
BACnet Settings Network and Device
—
BACnet Settings COV Notification
—
BACnet Settings Event Notification
—
BACnet Settings Object
[File] — [Save Settings As...]
[AE-200/AE-50/EW-50] — [Send Settings]
®
connection mode is "Online".
®
Setting Tool
®
Setting Tool, using the following procedure.
IP address of LAN1 (for air conditioning
system) of AE-200
(Refer to 7-2-1.)
Set to [Offline].
(Refer to 7-2-4.)
(Refer to 7-2-2.)
Set the IP addresses of LAN1 and LAN2.
(Refer to 8-2-1.)
Register the AE-200 device number.
(Refer to 8-4-1.)
Register other devices to be connected to
BACnet
(Refer to 8-4-2.)
Set the COV No. and notification address.
(Refer to 8-4-3.)
Set the notification class and notification
address.
(Refer to 8-4-4.)
Select the objects to be used and configure
the notification settings for each object.
(Refer to 8-4-5.)
(Refer to 7-1-4.)
(Refer to 7-2-3.)
Set to [Online].
(Refer to 7-2-4.)
Ensure that [Online] is set.
(Refer to 7-2-4.)
22
Setting items
®
.
*1