Panasonic KX-T30810 Installation Manual page 22

1.
Turn the Power Switch to ON . . . . . . . . . . . . . .. . . . . . . . . . . .
2.
Set the System Program Switch to PROGRAM . . . . . . . . . . . .
The L CD on the KX- T30830 shows "ENTER
PGM CODE".
®Be sure the handset of the extension 11 is in the cradle and
the speakerphone button of the extension
3.
To program automatic line access number 9 and the phone
n umber 987-654-3210 into memory location (speed dial
access) number 00. (Refer to page 2-5 . )
must always be KX- T30830.)
(Extension 11
Dial (01) or press the
A U TO button.
Press the NEXT button.
Dial (00) or press the
NEXT button .
@
CD Dial "9".
® Press'' "button.
Dial "987".
@ Press "-" button.
@ Dial "654".
@ Press "-" button.
([)Dial "3210".
Press the MEMORY
button.
• To program a next access code, press the NEXT
button.
• To program a desired access code, press the
SELECT butto n and then dial the n umber.
Repeat step 4 to 6.
To return to the initial
program mode, press the
END button.
4.
Return the System Program Switch to SE T
II
To make program change, start from the beginning.
11
is off.
at extension 11
Display
• If nothing is stored in
access code "00",
• If already stored the
automatic line access
number 9 and the
phone number
123-456-7890,
oo.- -123-456-7890
oo.- -987-654-3210
oo -987-654-3210
..
2 �
POWEFI
�
ON
OFF
SYSTEM
PRO ·
SET
GRI>. M
...
While programming if a mistake is made,
1.
Press the "END" button.
2 . Start programming procedure from
the beginning.
• You will hear the beeps after press the
MEMOR Y button.
•The MEMOR Y indicator light goes on when
the MEMOR Y button is pressed, and then
Indicator light goes out when the NEXT or
PREV button is pressed.
-J