Panasonic KX-T30810 Installation Manual page 99

Description
When the dialing mode is required to change a
pulse mode to a tone mode in one dialing
sequence, this feature is used.
(e.g. computer-accessed long distance service)
Operation
DIAL THE
DIAL " * # "
PHONE
NUMBER
When you dial using this feature, you must use
8
the line selected in a pulse mode.
�!!� P hone number after dial "* #" will change to
tone mode.
•A rotary phone is not available for the
Pulse/Tone Conversion.
• You should press "*" and "#" buttons within
10 seconds after the number of the long
distance service company.
• When you use a standard telephone equipped
with automatic dialer, be careful the follow­
ings:
Computer-accessed l'Ong distance ser­
Example:
vice
• Local access telephone number of the alternate
long distance service company 765-4321,
A uthorization no. 0123456,
Long distance no. 543-210-9876
�!!� P ulse mode is required by local access tele­
phone number of the alternate long distance
Service company.
•Service of MCI, SPRINT, METRO or other
systems is used.
Switch to TONE
Set to PULSE
. .
. .
Tone mode
Store the long distance service company no.
in PULSE mode, and switch to the TONE
mode to memory the following numbers.
Description
Operation
WAIT UNTIL A
CONFI RMATION
TONE IS HEARD
• You should press "*" button within 10
seconds after the dialing.
. . .
.
4- 7
"Voice alerting" (through built-in speaker) that
is established at the called party 's extension, can
be switched to " Tone alterting" (ringing) .
® This feature required to be set beforehand in
the KX-T30810. For programming, see page
2-29.
•A rotary phone is not available.
PRESS "*"
@ @
RING BACK
TONE