[02] [NEXT] [ A ] [ S ELECT] [MEMORY] [END]
or
[02] [NEXT] [NEXT] [ SELECT] [MEMORY] [END]
Description
You can program that which outside line is
conn ected and which one is not conn ected.
When an extension automatically selects an idle
outside line, the extension can be connected to it
q uickly.
Programming
1 .
Dial (02).
" CO CONNECTiON" will be displayed.
2.
Press the NEXT button .
"ENTER CO NO" will be displayed.
3.
Press the NEXT button.
" CO 1 : CONNECT" will be displayed and
"CONNECT" will blink.
4.
Press the SELECT button, to alternate be
tween CONNECT and NO CONNECT to
select the desired mode.
5.
Press the MEMOR Y button.
The blinking L CD will stop.
6.
Repeat steps 3 to 5, to program the dialing
mode on the other CO lines.
7.
To return to the initial program mode, press
the END button.
o assign the
1: on
3:
I
I
L --until the desired CO number appears
Conditions
Programming Table
a
s
on
me
. ... . . ..
.
When you start the programming from step
you may dial the desired CO number instead of
the NEXT button at step 3.
P
fb The
REV button allows you to see the entry
status in the previous CO connection assign
ment.
Example:
CO
and 2 . . . . . . . . . . . . . . . .
1
CO 3 . . . . . . . . . . . . . . . . . .
[02] [NEXT] [(NEXT)
1 .
2.
[NEXT] [MEMORY]
3.
[NEXT] [SELECT] [MEMORY] [END]
See page 5-14.
1,
CONNECT
NO CONNECT
(1 ) ] [MEMORY]
or