Disturbance Report Drprdre; Event Counter Cntggio; Fault Locator Lmbrflo; Generic Measured Value Mvggio - ABB REC670 Operator's Manual

1MRK 511 188-UEN C
11.6.10.2
11.6.10.3
11.6.10.4
11.6.10.5
11.6.10.6
11.6.10.7
Operator's manual
Displays sets of output measurements with several outputs per set of measurements.

Disturbance report DRPRDRE

Test/Function status/Monitoring/DisturbanceReport(RDRE)
Displays data about disturbance reports. The disturbance report can be switched
off, a disturbance report that has been initiated is indicated by a boolean number, as
are completed reports and cleared reports. The parameter MEM USED indicates
that more than 80% of the memory space available for disturbance report data has
been used and the need to clear the memory is pressing. The Memory USED
parameter generates an integer value showing the actual amount of memory used
by the disturbance record repository. The maximum number of incoming analog
channels is 40 and their Trig status is indicated here. The Fault number parameter
generates an integer indicating the number of faults recorded since the last clearing
of the memory.

Event counter CNTGGIO

Main menu/Test/Function status/Monitoring/EventCounter(GGIO)/CNT
Display the output data of the CNTGGIO function.

Fault locator LMBRFLO

Main menu/Test/Function status/Monitoring/FaultLocator(RFLO)/FLO
Displays instances with some measurements.

Generic measured value MVGGIO

Main menu/Test/Function status/Monitoring/GenericMeasuredValue(GGIO)/
MV
Displays the analog output from the MVGGIO block. The value shown here
depends on the settings and the logical configuration of the preprocessing blocks.
The measurement displayed may be current, voltage, frequency, phase angle etc.

Global positioning system

Main menu/Test/Function status/Monitoring/GPS
Displays the number of satellites supplying positioning and timing data to the GPS
module.

IEC61850 generic communication I/O functions 16 inputs SP16GGIO

Section 11
Test the IED
83