System Configuration - Siemens SINUMERIK 810D Configuration Manual

1 System Overview

1.2 System configuration

1.2 System configuration
Components
A fully--equipped SINUMERIK 810D system consists of various individual
components. These are listed below.
Table 1-2 Components of 810D at maximum configuration (excluding motors)
Components Order No.
Mains supply (MS) see Reference:
/PJ2/ SIMODRIVE Plan-
ning Guide
SINUMERIK 810D
- - CCU box 6FC5447-0AA00-0AA1
(3 axes)
- - CCU box 6FC5447-0AA01-0AA0
(2 axes)
- - CCU3 (Compact 6FC5 410-0AY03-1AA0
Control Unit) CCU
- - CCU2 (Compact 6FC5 410-0AX02-1AA0
Control Unit) CCU
- - CCU 1 (Compact 6FC5 410-0AY01-0AA0
Control Unit)
Operator panel front
1)
1)
PCU 20/50/70
Machine control
1)
panel
1)
ISA adapter
Full CNC keyboard
1)
Memory card
(PCMCIA)
1)
Disk drive unit
Cable distributor 6FX2 006-1BA02
Cable
Axis expansion 6FC5 412-0FA12-0AA0
plug- -in unit, left
Axis expansion 6FC5 412- -0FA10- -0AA0
plug- -in unit
1-14
Description
Mains supply for supplying power to electronics and drives. Either
open- -loop control (OI 5kW- -28kW) or closed loop control as an
infeed/regenerative feedback module (I/RF module), 16kW- -120kW
and over; optional filter modules.
Subrack for mounting the CCU with integrated power modules: 1 x
18/36A (FDD) or 24/32A (MSD) and 2 x 6/12A (FDD), internal cooling
only only
Subrack for mounting the CCU with integrated power modules: 2 x
9/18/A (FDD), internal or external cooling
The central processing unit of the 810D contains:
NCK, PLC AS 315, communication functions, standard digital
closed- -loop control
Additional functions:
- - 16MB DRAM, 2MB SRAM
- - Handling with 6 axes
- - 2nd Channel with 6 axes
The central processing unit of the 810D contains:
NCK, PLC AS 315, communication functions, standard digital
closed- -loop control
Additional functions:
- - 8MB DRAM, 2MB SRAM
- - Handling with 5 axes
- - 2nd channel with 5 axes
- - Connection for HPU
Same as CCU with the following changes:
- - Supports a full-functional sixth axis
- - Hardware/software separation: supplied with export software;
Miscellaneous functions on PCMCIA card
Display, keyboard and operator controls for the 810D
SINUMERIK PCU (Personal Computer Unit)
SIEMENS MCP or interface for customer MCP V_03_01_01 or
higher
Allows AT modules to be used in conjunction with the PCU
Full keyboard can be connected to PCU
Slot for PCMCIA card on CCU
PCMCIA card for software updates, SW 3 and higher (not 810DE)
The system software of the CCU1/2 is stored on internal flash
EPROM for software version < 3.1
Rack- -mounting unit for connection to the PCU
Connection of two handwheels and two probes to the CCU
References: /Z/, Catalog of accessories NC Z.
CCU3 only: place between I/RF module and 810D for axis expansion
when installing in a SIMODRIVE 611 D single-axis power module
References: /PJ/, SIMODRIVE 611 Planning Guide
For installing in a SIMODRIVE 611 power module (1-axis or 2-axis),
References: /PJ/, SIMODRIVE 611 Planning Guide
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
E Siemens AG, 2002. All rights reserved
11.02
12.95