Table of Contents
Advertisement
Options available in the dialog are:
Line Selection: Allows distinction between direct or dial-up modem connection to the
server.
Dial-up: Connects to a selected server with a modem.
Direct connect (Serial Line): Connects to the selected server directly using a null modem
serial cable.
Server: Displays a list of available servers in a dropdown edit list box. You can select or enter
a server name; a server must be selected wen the line selection is dial-up.
Serial Line: Must be filled out when the line selection is set to direct connect (serial line).
Baud Rate: Specifies baud rate; must be 19200 for EMP to connect properly.
COM Port No.: Sets the COM port number to which the null modem serial cable is
connected.
Connect: Initiates connection to the server. When you click this button, you are prompted
for the EMP password.
Config: Displays the Phonebook dialog.
Cancel: Exit the Connect dialog with no action taken.
Help: Display dialog-level help information.
Power on/off the server remotely
Selecting Power On/Off from the Action Menu allows you to power the server on or off, with
POST power-up options. It generates the Power on/off dialog.
C o n f i g u r a t i o n s o f t w a r e a n d u t i l i t i e s
Connect dialog
Power on/off dialog
FT5000 HANDBOOK
7/27
Advertisement
Table of Contents
