Hitachi HT-4139-48 Instruction Manual page 57

2.7.2.2 Replacement of Pick Roller
Pick Roller
Pulley
Marking
2.7.2.3 Replacement of Separator Roller
Separator Roller
① Remove the Pick Roller from the Pulley
② Take the reverse step to re-attach the
Gear
③ After re-attaching, to tighten the Pulley
Marking
① Remove the Separator Roller from the
Pulley using hands.
② Take the reverse step to re-attach
the Separator Roller.
*The Making on the Separator
Roller should be mounted on the
other side of the Gear.
③ After re-attaching, to tighten the
Pulley and the Roller, rotate the Roller
Pulley
strongly using palm.
by hand.
Both Pick Rollers can be removed by
pulling away from the Gear.
Pick Roller.
*The Marking on the Pick Roller should
be mounted on the other side of the
Gear.
and the Roller, rotate the Roller strongly
using palm
2. Operation
２
2-35