Mitsubishi Electric GOT1000 General Description Manual page 30

*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid
crystal display panel due to its characteristics. It is impossible to
completely avoid this symptom, as the liquid crystal display
comprises of a great number of display elements. Please note that
these dots appear due to its characteristic and are not caused by
product defect.
*2 With the hardware version indicated below, it will be 256 colors when
the multi-color display board is not installed.
For how to confirm the function version, refer to the following.
Appendix Confirming of Versions and Conformed Standards
Item
GT1585
*3 The GOT screen saving/backlight off function prevents images from
becoming permanently etched on the display screen and increases
the backlight life.
*4 ROM in which new data can be written without deleting the written
data.
*5 Compliant with IP67 when the USB environmental protection cover is
attached. Compliant with IP2X at the USB interface only when a
USB cable is connected. Note that this does not guarantee all users'
operation environment.
*6 For using multiple extension units, a bar code reader, or a RFID
controller, the total current for the extension units, bar code reader, or
RFID controller must be within the current that the GOT can supply.
For the current for the extension units, bar code reader or RFID
controller, and the current that the GOT can supply, refer to the
following manual.
GT Designer2 Version
Model
GT1585-STBA A
GT1585-STBD A
Screen Design Manual
15
Function version