(1) When using GT15-C
PLC
FG
LG
(GT15-EXCNB)
N
L
6)
1)Connect the LG and FG terminals of the terminal block on the GOT
unit power and ground them with a cable.
2)Use the GT15-C
3)Do not connect the GT15-EXCNB's FG ground cable.
4)Connect the GT15-C
the GOT unit power's terminal block.
5)Connect the GT15-C
the PLC's power supply module.
6)Connect the LG and FG terminals of the terminal block on the PLC
and ground them with a cable.
(2) When using GT15-C
For the both side GOTs, connect the LG and FG terminals of the
terminal block on the GOT unit power and ground them with a cable.
EXSS-1
Not connected
3)
2SQ cables to
FG terminals,
5)
28cm or less
BS's FG cable of 28cm or less.
BS's FG cable on the GOT side to FG of
BS's FG cable on the PLC side to FG of
BS
54
GOT
OUT
IN
L
N
LG
FG
4)
1)
2)