Mitsubishi Electric GOT1000 General Description Manual page 5

[MOUNTING PRECAUTIONS]
CAUTION
Use the GOT in the environment that satisfies the general specifications
described in this manual.
Not doing so can cause an electric shock, fire, malfunction or product damage
or deterioration.
When mounting the GOT to the control panel, tighten the mounting screws in
the specified torque range.
Undertightening can cause the GOT to drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to the
damage of the screws or the GOT.
When loading the communication unit to the GOT, fit it to the connection
interface of the GOT and tighten the mounting screws in the specified torque
range.
Under tightening can cause the GOT to drop, short circuit or malfunction.
Overtightening can cause a drop, failure or malfunction due to the damage of
the screws or unit.
When mounting the multi-color display board onto the GOT, tighten the
mounting screws within the specified torque range.
Loose tightening may cause the unit and/or GOT to malfunction due to poor
contact.
Overtightening may damage the screws, unit and/or GOT; they might
malfunction.
Push the option function board onto the corresponding connector until it
clicks, so that it will be secured firmly.
Push the multi-color display board onto the corresponding connector so that it
will be secured firmly.
When inserting a CF card into the GOT, push it into the insertion slot until the
CF card eject button will pop out.
Failure to do so may cause a malfunction due to poor contact.
When inserting/removing a CF card into/from the GOT, turn the CF card
access switch off in advance.
Failure to do so may corrupt data within the CF card
A-4