5.3 Mounting Position
When mounting the GOT, the following clearances must be left from
the other device.
Some cables may need to be longer than the specified dimensions
when connecting to the GOT.
Therefore, consider the connector dimensions and bending radius of
the cable as well for installation.
For the lead-in allowance for cables at the bottom of the GOT, refer to
the following.
C
Type
GOT
Bus connection unit is fitted
A
Serial communication unit fitted
RS-422 Conversion unit is fitted
GT15 User's Manual
GT1595
50(1.97) or more
[20(0.79) or more]
50(1.97) or more
[20(0.79) or more]
50(1.97) or more
[20(0.79) or more]
50(1.97)
or more
D
GT1585
GT157
50(1.97)
or more
[31(1.22)
or more]
50(1.97)
or more
[31(1.22)
or more]
50(1.97)
or more
[31(1.22)
or more]
51(2.01)
68(2.68)
or more
or more
35
E
Panel thickness: 2 to 4mm
(0.08 to 0.16inch)
GT156
50(1.97)
or more
[36(1.47)
or more]
50(1.97)
or more
[36(1.47)
or more]
50(1.97)
or more
[36(1.47)
or more]
73(2.87)
or more
(Continued to next page)
GT155
65(2.26)
or more
65(2.26)
or more
65(2.26)
or more
—