12
SERVICE WORK ON THE CHASSIS
12.9
Removing the seat
12.10
Mounting the seat
–
Pull on loop
–
Pull off the seat sideways at the front ends from the side cover.
–
Pull seat back and lift it off.
V00492-10
–
Stretch the seat at the front ends slightly and position holding tabs
The holding tabs engage in the holder.
–
Press holding tabs
–
Insert locking pin
until the locking pin engages with an audible click.
–
Check, finally, that the seat is correctly mounted.
V00497-10
while raising the rear of the seat.
into bushings
into the lock housing
.
and push down the rear of the seat
83
on holders
.