15
ELECTRICAL SYSTEM
15.9
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Mount and tighten screws
Guideline
Screw, headlight mask
–
Mount the brake line and wiring harness in holder
K00397-12
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Switch off the ignition by turning the ignition key to the OFF
–
Remove the headlight mask with the headlight. (
.
M5
.
p. 154)
p. 148)
151
5 Nm (3.7 lbf ft)
position.