ABB ACH550-01 User Manual page 137

6 The new value is displayed
below the START TIME 1
text. Press EXIT to return to
the main menu. Continue
with STOP TIME 1, START
DAY 1 and STOP DAY 1.
3. Creating a timer
Different time periods can be collected in a timer and connected
to parameters. The timer can act as the source of start/stop and
change direction commands, constant speed selection and relay
activation signals. Time periods can be in multiple timed
functions, but a parameter can only be connected to a single
timer. It is possible to create up to four timers.
To create a timer, follow these steps:
1 Press MENU to go to the
main menu.
2 Select PARAMETERS with
the UP/DOWN keys. Then
press ENTER to go to the
Parameters mode.
3 Scroll to group 36 TIMED
FUNCTIONS with the UP/
DOWN keys and press
SEL.
4 Scroll to TIMER 1 SRC with
the UP/DOWN keys and
press EDIT.
5 The current value is
displayed. Change the
value with the UP/DOWN
keys.
132
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ACH550-01 User's Manual
OFF PARAMETERS
3601 TIMERS ENABLE
3602 START TIME 1
08:30:00
3603 STOP TIME 1
3604 START DAY 1
EXIT
OFF
OFF
MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT
OFF PAR GROUPS
36 TIMED FUNCTIONS
37 USER LOAD CURVE
40 PROCESS PID SET 1
41 PROCESS PID SET 2
42 EXT / TRIM PID
EXIT
OFF PARAMETERS
3622 BOOST SEL
3623 BOOST TIME
3626 TIMER 1 SRC
3627 TIMER 2 SRC
EXIT
OFF PAR EDIT
3626 TIMER 1 SRC
NOT SEL
[0]
CANCEL
Real-time clock and timed functions
00:00 EDIT
0.0Hz
0. 0 Hz
0. 0 A
0. 0 %
00:00 MENU
1
00:00 ENTER
36
00:00 SEL
NOT SEL
00:00 EDIT
00:00 SAVE