Preparing The Mounting Location - ABB ACH550-01 User Manual

Preparing the mounting location

1. Use the mounting
template to mark the
position of the mounting
holes.
2. Drill the holes.
3. Insert the screws halfway
into the holes.
Note: Frame sizes R3 and R4 have four holes along the top.
Use only two. If possible, use the two outside holes (to allow
room to remove the fan for maintenance).
38
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ACH550-01 User's Manual
1
Installing the drive