ABB ACH550-01 User Manual page 271

A parameter can be connected to only one timer.
TIMER 1
3626 TIMER 1 SRC
TIMER 2
3627 TIMER 2 SRC
Code Description
3601 TIMERS ENABLE
Selects the source for the timer enable signal.
0 = – Timed functions are disabled.
NOT SEL
1 = 1 – Defines digital input
DI
• The digital input must be activated for timed functions enable.
2...6 = 2...
DI
enable signal.
7 = – Timed functions are enabled.
ACTIVE
-1 = 1( ) – Defines an inverted digital input
DI INV
enable signal.
• This digital input must be de-activated for timed function enable.
-2...-6 = 2(
DI
as the timed function enable signal.
3602 START TIME 1
Defines the daily start time.
• The time can be changed in steps of 2 seconds.
• If parameter value is 07:00:00, the timer will be activated at 7 a.m.
• The figure shows multiple periods on different weekdays.
20:30:00
17:00:00
15:00:00
13:00:00
12:00:00
10:30:00
09:00:00
266
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1001
EXT
1002
EXT
1102
EXT
1201
CONST SPEED SEL
1401
RELAY OUTPUT
1410
RELAY OUTPUT
4027
PID
4228
ACTIVATE
8126
TIMED AUTOCHANGE
1 as the timed function enable signal.
DI
6 – Defines digital input
DI
)... 6( ) – Defines an inverted digital input
INV DI INV
Mon Tue Wed Thu Fri Sat Sun
ACH550-01 User's Manual
1
COMMANDS
2
COMMANDS
1/ 2
EXT SEL
1...1403
4...1412
1
PARAM SET
Range
-6...7
2... 6 as the timed function
DI DI
1 as the timed function
DI
00:00:00...23:59:58
Parameter listing and descriptions
3
RELAY OUTPUT
6
RELAY OUTPUT
2... 6
DI DI