To Install The Battery - Suzuki Swift 2015 Owner's Manual

Tires: 6
INSPECTION AND MAINTENANCE
EXAMPLE-2
Diesel
EXAMPLE
Max
Min
The level of the battery solution must be
kept between the "Max" and the "Min" level
lines at all times. If the level is found to be
below the "Min" level line, add distilled
water to bring level between "Max" and
"Min". You should, however, periodically
check the battery, battery terminals and
battery hold-down bracket for corrosion.
Remove corrosion using a stiff brush and
ammonia mixed with water, or baking soda
mixed with water. After removing corrosion,
rinse with clean water.
If your vehicle is not going to be driven for
a month or longer, disconnect the cable
from the negative terminal of the battery to
help prevent discharge..
7-21
Replacement of the battery
TYPE 1
(3)
EXAMPLE (1)
(2)
51KM038
TYPE 2
(1)
EXAMPLE
(2)
(3)
51KM039
To remove the battery:
1) Disconnect the negative cable (1).
2) Disconnect the positive cable (2).
For Type 1
3) Remove the retainer nuts (3) and
remove the retainer (4).
For Type 2
3) Remove the bracket bolt (3) and
remove the bracket (4).
4) Remove the battery.
(4)
NOTICE
• Ensure that battery should not be
removed without cover assembly.
• When the battery is reassembled
into the vehicle, kindly ensure that
battery cover is also installed along
with battery.

To install the battery:

1) Install the battery in the reverse order of
removal.
2) Tighten the retainer nuts and battery
cables securely.
NOTE:
When the battery is disconnected, some of
the vehicle's function will be initialized and/
or deactivated.
These function are required to reset after
(4)
the battery is reconnected.
74LH0-74E