Table of Contents
Advertisement
BEFORE DRIVING
Information Display
EXAMPLE
(A)
(B)
(C)
(D)
(E)
(1)
(3)
(2)
74LM02001
(1) Trip meter selector knob
(2) Indicator selector knob
(3) Information display
When the ignition switch is in the "ON"
position or the ignition mode is "ON", the
information display shows the following
information.
Display (A)
Thermometer
Display (B) (For automatic transmis-
sion)
/
(For
automated
manual
transaxle)
Transmission selector Position Indicator
Display (C)
Trip meter / Instantaneous fuel consump-
tion / Average fuel consumption / Driving
range.
2-53
Display (D)
Odometer
Display (E)
Clock
Thermometer (if equipped)
When the ignition switch is in the "ON"
position or the ignition mode is "ON", the
display (A) shows the thermometer.
The thermometer indicates the outside
temperature.
EXAMPLE
(a )
68LM258
If the outside temperature nears freezing,
the mark (a) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the ignition switch
is turned to the "ON" position or the
engine switch is pressed to change the
ignition mode is "ON", the display may
not indicate the outside temperature.
When the display (B) shows the driving
range, you can change the unit of tempera-
ture.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (1), turn the indicator selector knob
(2).
EXAMPLE
(Initial
setting)
68LM259
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
Transmission selector position indica-
tor (for automatic transmission vehi-
cles)
EXAMPLE
(b)
74LM02002
When the ignition switch is in the "ON"
position or the ignition mode is "ON" the
74LH0-74E
Advertisement
Table of Contents
