Jacking Instructions: 5 - Suzuki Swift 2015 Owner's Manual

Jacking Instructions: 5

WARNING
After using the tire changing tools, be
sure to stow them securely or they
can cause injury if an accident
occurs.
CAUTION
The jack should be used only to
change wheels. It is important to read
the jacking instructions in this sec-
tion before attempting to use the
jack.
Jacking Instructions
1) Place the vehicle on level, hard ground.
2) Set the parking brake firmly and shift
into "R" (Reverse).
WARNING
• Be sure to shift into "R" (Reverse)
when you jack up the vehicle.
• Never jack up the vehicle with the
transmission in "N" (Neutral). Oth-
erwise, unstable jack may cause an
accident.
3) Turn on the hazard warning flasher if
your vehicle is near traffic.
4) Block the front and rear of the wheel
diagonally opposite of the wheel being
lifted.
5) Place the spare wheel near the wheel
being lifted as shown in the illustration
in case that the jack slips.
75F062
EMERGENCY SERVICE
6) Position the jack vertically as shown in
the illustration and raise the jack by
turning the jack handle clockwise until
54G253
the jack-head groove fits around the
jacking bar beneath the vehicle body.
63J100
63J101
8-2
74LH0-74E