NEC Aspila EX Hardware Manual page 115

CÔNG TY VIỄN THÔNG VIỆT PRO
12. After plugging in the PGDAD confirm with Program 10-03 that the mode of each circuit cor-
13. Optional:
14. The back of the 2PGDAD module has two key-hole type openings. Place the 2PGDAD mod-
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
10-03. The PGDAD will then automatically configure when plugged in.
responds to the setting of the jumpers S3-S6
To wall mount the 2PGDAD module, insert two wood screws 100mm apart. Leave 3mm of
the screw exposed. The screws can be installed either vertical or horizontal, depending on
which position fits best for your location.
Figure 4-7: INSTALLING THE SCREWS
ule over the two screws and slide it down or over (depending on the positioning) to lock it in
place.
Figure 4-8: WALL MOUNTING THE 2PGDAD MODULE
Section 4: Optional Equipment
Section 4: Optional Equipment
http://vietpro.com.vn
4
4-5