NEC Aspila EX Hardware Manual page 60

CÔNG TY VIỄN THÔNG VIỆT PRO
Section 2: PCB Installation and Startup
To install the ESIU PCB:
1.
2.
3.
4.
The 16ESIU PCB is shown here.
2-18 Section 2: PCB Installation and Startup
Chuyên phân phối tổng đài NEC
Set the run/block switch to block, DOWN .
Install the ESIU into a slot.
Note that the white PCB Pull Tab should always be positioned closest to the top of the
cabinet.
Set the ESIU run/block switch to run, UP .
The 8ESIU will use the first block of 8 extension ports available, the 16ESIU will use the first
block of 16 extension ports. Confirm the ports used with Program 10-03.
Figure 2-8: ESIU INSTALLATION
http://vietpro.com.vn
Aspila EX Hardware Man-