NEC Aspila EX Hardware Manual page 86

CÔNG TY VIỄN THÔNG VIỆT PRO
Section 2: PCB Installation and Startup
Installing the 8SHUBU:
1.
2.
3.
4.
2-44 Section 2: PCB Installation and Startup
Chuyên phân phối tổng đài NEC
Set the run/block switch to block, DOWN.
Plug the LAN 8-Port Switching Hub PCB into any universal slot.
Note that the white PCB Pull Tab should always be positioned closest to the top of the
cabinet.
Set the RUN/BLOCK switch to run, UP.
With normal operation, the status LED will flash fast. If trouble was found during the self
diagnostics routine, the status LED will flash slowly.
Refer to the VoIP Feature Supplement for required programming.
Figure 2-18: 8SHUBU INSTALLATION
http://vietpro.com.vn
Aspila EX Hardware Man-