Ports For Apr Adapter5 - NEC Aspila EX Hardware Manual

CÔNG TY VIỄN THÔNG VIỆT PRO
Ports for APR Adapter
The APR Adapter's extension number is determined when the adapter is connected to the system
phone. After assigning the APR Adapter a circuit type of '12' in Program 10-03-06, the system auto-
matically selects the next available port within the APR's range (193-256). The system assigns the
ports numbers from highest to lowest (256, 255, 254, etc.). Program 10-03-07 indicates which port is
assigned for the APR Adapter. You can reassign the extension number for the port using Program 11-
02-01.
Use the table below to determine the extension number associated with the port number.
Programming for System and Alarm Reports
• 90-13-01 : System Information Output - Output Port Type
Indicate the type of connection used for the SMDR (0=No setting, 1=COM port (NTCPU),
2=USB port (NTCPU), 4= CTA/CTU).
• 90-13-02 : System Information Output - Destination Extension Number
If the output port type (item 1) is set to CTA, enter the extension number with the CTA connec-
tion.
• 90-13-03 : System Information Output - Output Command
Dialing 1 from this program sends the system report to the connected device.
• 90-12-01 : System Alarm Output - Output Port Type
Indicate the type of connection used for the System Alarms. The baud rate for the COM port
should be set in Program 10-21-02 (0=No setting, 1=COM port (NTCPU), 2=USB port
(NTCPU), 4=CTA/CTU).
• 90-12-02 : System Alarm Output - Destination Extension Number
If the output port type (item 1) is set to CTA, enter the extension number with the CTA connec-
tion.
• 90-12-06 : System Alarm Output - Output Mode
Indicate if the output for the alarms should be manual (0) or automatic (1).
Use the following programs for outputting or clearing the alarm reports:
• 90-12-03 : System Alarm Output - Output All Alarm Reports
• 90-12-04 : System Alarm Output - Printout New Alarm Reports
• 90-12-06 : System Alarm Output - Clear All Alarm Reports
Refer to Data Communications Interface in the Software Manual for additional details.
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
APR Extension Port Number
193
:
199
200
:
256
Section 5: Data and SMDR
Extension Number
493
:
499
5000
:
5056
Section 5: Data and SMDR
http://vietpro.com.vn
5
5-3