NEC Aspila EX Hardware Manual page 141

CÔNG TY VIỄN THÔNG VIỆT PRO
4.
5.
6.
7.
8.
9.
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
Position the adapter with the connector positioned as shown below.
Figure 4-34: POSITIONING THE ADAPTER
Hook the two plastic prongs into the bottom of the phone.
Push the connector into place. The top latch on the top of the adapter should lock into place
when it is properly positioned.
Plug an AC/DC adapter into the AC jack on the adapter if power is not supplied by the LAN.
Plug in the LAN straight-thru cable from the NTCPU LAN connector or 16VOIPU PCB LAN
connector for the phone operation. If needed, connect the PC cross cable to the VoIP Adapter.
Refer to the VoIP Feature Supplement for required programming.
Figure 4-35: WIRING LAYOUT FOR VOIP
Section 4: Optional Equipment
Section 4: Optional Equipment
http://vietpro.com.vn
4
4-31