Display Link-Aggregation Member-Port - HP 3600 v2 Series Command Reference Manual

Bridge-Aggregation10 Load-Sharing Mode:
Layer 2 traffic: packet type-based sharing
Layer 3 traffic: packet type-based sharing
Table 18 Command output
Field
Link-Aggregation Load-Sharing
Mode
Bridge-Aggregation10
Load-Sharing Mode
Route-Aggregation10
Load-Sharing Mode
Layer 2 traffic: packet type-based
sharing
Layer 3 traffic: packet type-based
sharing

display link-aggregation member-port

Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number indicates
the port type and port number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.
Only the port number and operational key of a member port in a static aggregation group are displayed,
because the aggregation group is not aware of the partner's information.
Description
Global link-aggregation load sharing criteria.
Link-aggregation load sharing criteria of the aggregation group
corresponding to the aggregate interface Bridge-Aggregation 10.
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
Default link-aggregation load sharing criterion for Layer 2 traffic. In this
sample output, the criterion is the packet type.
Default link-aggregation load sharing criterion for Layer 3 traffic. In this
sample output, the criterion is the packet type.
82