Installing The Extender (Optional) - Huawei DBS3900 Installation Manual

Lampsite
Hide thumbs Also See for DBS3900:
Table of Contents

Advertisement

DBS3900 LampSite
Installation Guide
10
This section describes the Extender installation process.
Context
When an RHUB and a pRRU need extended install, use extender. With the Extender, the
distance of the pRRU and RHUB can be extended by the Extender up to a total distance of
200 m.
The Extender can be installed on a wall or ceiling in the same mode. This section describes
wall-mounted installation as an example.
Only space above and under the Extender is required to be reserved when installing the
Extender. The recommended space for installing the Extender is described as follows:
l
l
Procedure
Step 1 Use a marker to mark the two anchor points according to inter-hole spacing, as shown in
Figure
Issue 06 (2015-10-30)

Installing the Extender (Optional)

At least 150 mm above the Extender is reserved for cabling.
At least 150 mm under the Extender is reserved for cabling.
10-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Installing the Extender (Optional)
165

Advertisement

Table of Contents
loading

Table of Contents