Removing Or Installing The Tilt Legs On The Multiline Terminal; Remove Tilt Legs - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100
4.9
System Hardware Manual

Removing or Installing the Tilt Legs on the Multiline Terminal

The Tilt Legs can be removed or installed on the DT300/DT700 Series
multiline terminal.
4.9.1

Remove Tilt Legs

1. Place the telephone on a flat surface (button side down).
2. Separate the Tilt Legs and place them flat against the
telephone. See
3. Push downward (two arrows) and slide downward (refer to
Figure 5-42 Attach Tilt Legs to DT300/DT700 Series
Figure 5-42 Attach Tilt Legs to DT300/DT700 Series Terminal
Figure 5-41 Separating the Tilt
Figure 5-41 Separating the Tilt Legs
Issue 7.0
Legs.
Terminal.
5 - 45