Issue 7.0
10.12 Attaching and Removing the Belt Clip
5 - 116
3.
Place the charging unit on the posts of the wall screws and push down
until it is firmly seated.
Figure 5-141 Placing the Charging Unit on the Wall
4.
Plug the AC adapter into a standard 230 Vac wall outlet. Refer to
5-141 Placing the Charging Unit on the
A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1.
Slide the clip into the tab slots. Press firmly until it snaps into place. The
belt clip fits snugly onto the handset.
Figure 5-142 Attaching the Belt Clip to the Handset
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100
Wall.
Figure