Installing The External Batteries 9.5" Chassis; Battery Installation - NEC UNIVERGE SV8100 System Hardware Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

Installing the External Batteries 9.5" Chassis

An optional, CHSGW SMALL BATT BOX can be installed to provide external

battery power to the CHS2U GW chassis during a power failure. The short-

term battery box will power the system for approximately 10 minutes.

On the battery box compartment, remove the two screws then

lift and set aside the top cover.

Figure 3-93 Remove Top Cover of Battery Compartment

Remove the metal support bracket.

Insert the two short-term batteries.

Place the battery cable on top of the batteries and adjust to take

up the extra length. Allow enough length for the connections to be

made to the equipment.

Figure 3-94 Installing the Batteries

Installing the SV8100 Chassis

UNIVERGE SV8100