10.11 Wall Mounting The Charging Unit - NEC UNIVERGE SV8100 System Hardware Manual
Hide thumbs
Also See for UNIVERGE SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
UNIVERGE SV8100
10.11 Wall Mounting the Charging Unit
System Hardware Manual
The charging unit is also designed to be wall mounted. Before mounting the
charging unit, consider the following:
Select a location away from electrical cables, pipes, or other items behind
m
the mounting location that could cause a hazard when inserting screws into
the wall.
Make sure the wall material can support the weight of the charging unit.
m
Use #10 screws with anchoring devices suitable for the wall material where
m
the charging unit will be placed.
To mount the charging unit:
1.
Insert two mounting screws one inch apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting the telephone.
Figure 5-139 Inserting Screws for Wall Mounting
2.
Plug the AC adapter into the charging unit. Wrap the AC adapter cord
around the strain relief.
Figure 5-140 Wrapping the AC Adapter Cord Around the Strain Relief
Issue 7.0
5 - 115
Advertisement
Table of Contents
