HP 12500 Series Configuration Manual page 356

To configure routing features for the BGP-VPNv6 subaddress family:
To do...
Enter system view
Enter BGP view
Configure the remote PE as the
peer
Specify the interface for TCP
connections
Enter BGP-VPNv6 subaddress
family view
Set the default value of the local
preference
Set the default value for the system
MED
Configure a filtering policy to filter
routes to be advertised
Configure a filtering policy to filter
received routes
Apply a filtering policy for the peer
Apply an IPv6-prefix list for the
peer to filter received/advertised
routes
Specify the preference value for the
routes received from the peer
Configure BGP updates to the peer
to not carry private AS numbers
Apply a routing policy for the peer
Enable VPN target filtering for
received BGP-VPNv6 subaddress
family routes
Configure the local PE as the route
reflector and specify the peer as
the client
Enable route reflection between
clients
Use the command...
system-view
bgp as-number
peer ip-address as-number
as-number
peer ip-address connect-interface
interface-type interface-number
ipv6-family vpnv6
default local-preference value
default med med-value
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ direct | isisv6 process-id |
ripng process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
peer ip-address filter-policy
acl6-number { export | import }
peer ip-address ipv6-prefix
prefix-name { export | import }
peer ip-address preferred-value
value
peer ip-address public-as-only
peer ip-address route-policy
route-policy-name { export |
import }
policy vpn-target
peer ip-address reflect-client
reflect between-clients
348
Remarks
—
—
Required
Required
—
Optional
100 by default
Optional
By default, the default value of the
system MED is 0.
Optional
By default, the PE does not filter
routes to be advertised.
Optional
By default, the PE does not filter
received routes.
Optional
By default, no filtering policy is
applied for a peer.
Optional
By default, no IPv6 prefix list is
applied for a peer.
Optional
0 by default
Optional
By default, a BGP update carries
private AS numbers.
Optional
By default, no routing policy is
applied for a peer.
Optional
Enabled by default
Optional
No route reflector or client is
configured by default.
Optional
Enabled by default