Figure 3-2 Removing The Ramp And Packing Material - HP A1896A Installation Manual

3. Remove the clam shell box from the pallet.
4. Remove the ramp and packing material (1) from the top of the cabinet. See Figure 3-2.

Figure 3-2 Removing the Ramp and Packing Material

5. Remove the shrink wrap (2) from around the cabinet. This also holds the bezel
protective packing (3) on the front corners of the cabinet. Remove the bezel corner
packing (3). See Figure 3-2.
Chapter 3
Unpacking and Installation
Unpacking the Cabinet Assembly
3-3