Siemens sinumerik 840D sl Operating Manual page 443

Procedure
Parameters
X
Y
Z
U
C
C1
C3
Z3
AWZ
GS
F
Radius compensation
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1. The ShopTurn program to be processed has been created and you
are in the editor.
2. Press the menu forward key and the "Straight Circle" softkey.
3. Press the "Straight" softkey.
4. Press the "Rapid traverse" softkey if you want to use rapid traverse
instead of a programmed machining feedrate.
Description
Target position X ∅ (abs) or target position X referred to the last programmed
position (inc)
Target position Y (abs) or target position Y referred to the last programmed
position (inc)
Target position Z (abs) or target position Z referred to the last programmed
position (inc)
Target position (abs) or target position referred to the actual position (inc)
Target angle (abs) or target angle referred to the actual position (inc)
Target position of C axis of main spindle (abs or inc)
Target position of C axis of counterspindle (abs or inc)
Target position of special axis (abs or inc)
Note:
Incremental dimension: The sign is also evaluated.
Target angle (abs) or target angle referred to the actual position (inc)
Target angle (abs) or target angle referred to the actual position (inc)
Machining feedrate
Alternatively, rapid traverse
Input defining which side of the contour the cutter travels in the traversing
direction:
Radius compensation to right of contour
Radius compensation to left of contour
Radius compensation off
The previously programmed setting for radius compensation is used.
Programming technology functions (cycles)
8.7 Further cycles and functions ShopTurn
Unit
mm
mm
mm
mm
Degrees
mm
mm
mm
Degrees
Degrees
mm/rev
mm/min
mm/tooth
443